USA Tel: (201) 880-0366 | info@britcycle.com | Fax (902) 542-7479 | Canadian Tel: (902) 542-7478
Helping keep British Motorcycles on the road for over 30 years - established 1977

Triumph 500 Bottom End Rebuild

I was wanting to share what I made the crusty bits into. go ahead and share.

it ended up being "interesting" because that was the second time the RH case was changed. The previous junk RH case was a later one with subtle differences like Unified instead of CE threads. LH base nuts CE, RH UNF. By using the correct case we made everything consistent. In addition to the normal deck and bearing work I welded up the drilled breather holes and put the timed breather back in. Ill send before and after on the A10 head when it gets done.