USA Tel: (201) 880-0366 | info@britcycle.com | Fax (902) 542-7479 | Canadian Tel: (902) 542-7478
Helping keep British Motorcycles on the road for over 30 years - established 1977

LED POS/NEG Flasher Units With Running Lights

Part Numbers 391-35048/B & 391-35048/C

This Flasher/Running Light Unit has been designed for use with our LED products. This unit has 5 user selectable flash patterns at a push of a button. Each unit is ground system sensitive and specific.

Note: Not all flash patterns meets DOT or most 50 States Turn Signal Flash Rate Requirements. Check your local and State laws regarding Turn Signal Flashing Rates for all other “Patterns” offered. The use of the any other flash pattern, other than the 2 supplied approved patterns is at the user/installer's discretion.

391-35048/B - LED Flasher Unit, Positive With Running Lights
391-35048/C - LED Flasher Unit, Negative With Running Lights

User Selectable Flash Patterns

>> Slow Flash, 60 PPM
>> Fast Flash, 90 PPM
>> The Pointer, 3 flashes then "ON"
>> The Wave, 4 flashes then 3 quick
>> Strobe, 2 quick flashes then "OFF"

Product Features

>> 12-14 VDC operation, ground system specific.
>> 5 user selectable flash patterns.
>> Pattern number confirmation at a single push.
>> Separated and individually controlled outputs.
>> Dedicated output for single indicator lamp.
>> On Board Diagnostics (OBD) upon power up.
>> Built-in Circuit Protection, Fused input.
>> Easy pattern and unit "Resets".
>> Precise microprocessor control.
>> Removable Euro-style screw terminal blocks.

Kit Contains

>> BTL4E-005 "Pulsar-RL" Module.
>> Pre-assembly power cable assembly.
>> Euro-style screw terminal blocks.
>> Fully Illustrated installation instructions.