USA Tel: (201) 880-0366 | info@britcycle.com | Fax (902) 542-7479 | Canadian Tel: (902) 542-7478
Helping keep British Motorcycles on the road for over 30 years - established 1977

Spark Plug Wire and Cap Kits

345-Series

345-01    Plug Wire Kit, UNIVERSAL, Black, Copper  7mm
345-01/A  Plug Wire Kit, JOE HUNT, Black, Resistor 8mm
345-06    Plug Wire Kit, UNIVERSAL, RED, Resistor  8mm

345-03    Plug Wire & Cap, Black, Resistor, 24" 7mm
345-03/A  Plug Wire & Cap, Black, Copper,   24" 7mm
345-04    Plug Wire & Cap, Black, Resistor, 10" 7mm
345-04/A  Plug Wire & Cap, Black, Copper,   10" 7mm

Complete your tune-up with a new set of plug wires!

#345-01 PLUG WIRE KIT, UNIVERSAL, BLACK, 7MM

345-01 PLUG WIRE KIT ,UNIVERSAL, BLACK, 7MM
7mm copper core, made in USA.

Each kit consists of 36" long overall, black US made 7mm silicone wire with two black rubber right angle spark plug caps fitted and two loose straight coilend fittings, and two right angle ones. One kit will do most custom applications and bikes not covered by 345-03/A or 345-03/A below. Two required for motorcycles with distributors.

Note: For Lucas mags and Lucas distributors using a plastic nut to retain wires, requires 2) of split washer # 391-185015 for plug wires at pickup or cap instead of using terminals included in kit at mag end.

345-01/A PLUGWIRE KIT, JOE HUNT MAGNETOS, 8MM, BLACK
Two 8MM wires, each with right angle molded plug cap installed, straight boots loose in a pack and copper terminals. WIRES MARKED: HUNT MAGNETO 8MM SILICONE IGNITION WIRE.

#345-06 PLUG WIRE KIT, UNIVERSAL, RED, RESISTOR, 8MM
8MM SILICONE SUPRESSION CABLE, USA
.300" OD, 22,500 OHM TOTAL, 36" WIRE
Complete with black caps, right angle and straight coil end terminals and boots.


#345-03 and 03/A --- PLUG WIRE & CAP, BLACK, 24", 7MM
Two will do Triumph/BSA oil-in-frame twins. Three will do all Triumph/BSA triples


#345-04 AND 04/A --- PLUG WIRE & CAP, BLACK, 10", 7MM
Two will do Commandos and Triumph/BSA pre oil-in-frame twins with coils under the gastank